| Toilets do get blocked. So this is how to deal with the problem. | |||
| Take a large long handled open-flange plunger, you can hire one if you need
to. Place the plunger over the drain opening that is at the base of the bowl,
make sure you have taken any excess water out of the bowl first. Make sure
you leave enough water to cover the plunger cup, then you need to pump up
and down quite hard for about 10 minutes then you need to flush the toilet
only do this if you think you have shifted the blockage if not carry on till
you have. You will know if you have cleared the blockage because the water
will go down.
If you are still having problems you may need to use a WC auger. This is a flexible rod with a crank handle on one end. The flexible end goes into the trap, make sure you read the instructions that come with it. If you are not sure what to do and you think you will do more damage then get a plumber in to do it. MAKE SURE YOU WASH YOUR HANDS AND ANY EQUIPMENT AFTER YOU HAVE USED IT |
|||
|
Copyright © 2002 Simplychangeit.com, Simplychangeit.co.uk, Simplychangeit.info All rights reserved
For More information about this website email me at webmaster
Simply Change It Disclaimer
The authors of this web site accept no liability for damage or injury arising from the use of information contained on these pages. Always ensure you have the necessary tools to undertake the task and only attempt DIY if you are confident you have the necessary skills to complete the work. If not hire a professional tradesman to carry out the work. Always read the instructions that come with materials or equipment. Check and double check measurements. Use safety equipment e.g. goggles, ear defenders and protective clothing as necessary, especially when operating power tools. Always check before cutting and drilling for hidden pipes and cables. and finally. TAKE CARE WITH WHAT YOU ARE DOING. This site is design for UK standards no allowances for national or regional variations has been taken into account.